EnviroServe Chemicals, Inc.| Miscellaneous Surface Treatments | |
| |
| Rust Converters | |
| Rust converters made by EnviroServe Chemicals are solutions designed to be applied directly to rusty metal surfaces. Our rust converters react directly with the iron oxide, transforming the rust into a more stable form of iron (known as "black" iron phosphate), which also inhibits further rusting of the metal. Proper selection and use of the products will eliminate strenuous sanding operations of the metal as well. These products dry to a paintable, black protective barrier which may be top coated with oil-based paints Our full line of rust converters have been thoroughly tested by many of the North Carolina Shrimp Boat Captains and Fish House Owners. Our EnviroServe Chemicals' Rust Converter brand of rust converter products actually chemically converts rust to a rust-inhibiting protective coating. | |
| Rust Strippers and Descalers | |
| EnviroServe Chemicals' rust strippers and heavy descalers, EnviroStrip brand are among the best and fastest rust strippers on the market. They have been industrially tested and proven to strip rust and in many cases clean heavy encrusted soils off most metal surfaces. We have a wide assortment of rust strippers tailored for almost any type of rust, metal part or stripping operation. | |
| |
| Welding Anti-Spatters | |
| EnviroServe Chemicals' Anti-Spatter products provide high resistance to weld spatter accumulation while keeping your tip, nozzle & gas diffuser areas free of spatter build up, resulting in better penetration & appearance. These products will not smoke when used in any type hot work operation. EnviroServe Chemicals' Anti-Spatters are safe, soap-based, water-soluble, biodegradable spray-on solutions designed to stop weld spatter build up, while working as a degreaser as well as! EnviroServe Chemicals' Anti-Spatters eliminates far more spatter build up then our competition. In fact, EnviroServe Chemicals' Anti-Spatters remove most process oils, dirt and grime, leaving your parts cleaner. | |
| Rinse Aids, Additives and Defoamers | |
| Rinsing is needed after the cleaning or phosphating processes to remove any remaining oils, solids, soluble salts, surfactants, reaction products, or other contaminants that could affect final product quality. Chemical rinse aid treatments during the rinse stages may include pH adjusters to avoid flash rusting or preparing the surface for the next coating or in-process step. EnviroServe Chemicals' EnviroAdd rinse aids tend to accelerate drainage and speeds up evaporation for faster drying with less water spots! We have a full line of tested and proven rinse aids, additives, and defoamers for both metal and plastic processing. Whether you need a rinse aid to help speed rinsing, a cleaning additive booster or just a good defoamer, we have the product you need | |
| Exotic and Precious Metals | |
| For exotic metal processing like, aluminum, copper, brass, bronze, titanium, inconel, nickel, cobalt, and their alloys EnviroServe Chemicals offers a complete line of non-staining lubricants, corrosion inhibitors, and cleaning products.
EnviroCool, EnviroCut, EnviroForm, and EnviroDraw brand of lubricants provide complete non-staining qualities with exceptional boundary and extreme pressure lubricity. We have straight oils, emulsifiable oils, synthetics, neo-synthetics, and semi-synthetic concentrates available. Our machining lubricants have a unique biocide package that results in long sump life and less foul odors. Because of their superior lubrication characteristics, parts can be machined to achieve an excellent mirror or micro surface finishes while maintaining dimensional stability. Our stamping, forming, and drawing products are used in light to heavy-duty operations. They perform successfully in a variety of press configurations including single op presses or high speed progressive die operations. EnviroServe Chemicals has specialized in formulating vanishing lubricants for the exotic metals industry. These products are used where minimal lubricity and no residual films are required or needed. Use these products on thin gauge non-ferrous metals. Typical applications for vanishing lubricants include blanking, drawing, roll forming, and fin forming. EnviroServe Chemicals has developed a line of corrosion inhibitors for the exotic metals industry. The EnviroBlock brands of inhibitors were designed to give excellent non-staining corrosion protection for your metals. EnviroServe Chemicals' experience and knowledge of appropriate chemistries and proper cleaning recommendations insure proper cleaner selection. From single stage spray; multi-stage spray systems; agitated immersions; ultrasonic; to a large variety of mass finishing equipment; soak tanks; cabinet, screw and belt washers. EnviroServe Chemicals' EnviroClean non-staining cleaners can help improve productivity and efficiency in any cleaning operation. They are typically used at low temperatures, are free rinsing, and used at low concentrations. | |
| Corrosion Control | |
| There are two major types of chemistry used to combat and control corrosion and rust. They are corrosion inhibitors and Corrosion Preventing Compounds (CPCs). Each type is briefly discussed below: | |
| Corrosion inhibitors are chemicals that react with a metal surface, or the environment this surface is exposed to, giving the surface a certain level of protection. EnviroServe Chemicals' EnviroBlock inhibitors work by depositing themselves onto the metal surface, becoming a part of the metal surface, and then protecting the metal surface by forming a protective barrier. Inhibitors are applied by means of a chemical solution. | |
| CPCs have been used by the manufacturing industry for many years as a means of preventing rust or corrosion. CPCs range from water displacing to non-water displacing soft films and water displacing to non-water displacing hard films. Our EnviroBlock products contain or may include one or more of the following: oil, grease, or a resin based filming agent; a volatile carrier solvent; a non-volatile hydrophobic additive and or various corrosion inhibitors. The water displacing CPCs spread across the surface of the metal parts, into the tiny holes, cracks, and crevices where they displace any moisture and leave a protective film behind to act as a further barrier. The non-water displacing CPCs dries to a soft waxy, greasy or somewhat thicker film while providing a barrier film to most corrosive environments. You can see a further list of EnviroServe Chemicals products under our Corrosion Control page! | |
| For more information about our products contact us at sales@enviroserveinc.com |