Deep Drawing
Deep drawing technology is used in a wide range of production processes. For example, it is used by the automotive industry to manufacture car parts and filters. It is also used for making household items such as stainless steel kitchen sinks.
Deep drawn items such as munitions shells; fire extinguishers; refrigeration compressors; and many more can be found almost anywhere. These difficult drawing operations require a high performance compound with good hold-down features.
When applied correctly, EnviroServe Chemicals' Deep Drawing products prevent wrinkling and provides good lubrication which permits good metal flow. They are ideal for difficult-to-draw objects such as bathtubs and sinks. We have a short descriptive list of our heavy-duty products made for deep drawing and other difficult operations listed below:
Heavy Duty Drawing Paste
  • Pigmented
  • Extreme Pressure Fortified
Hydrocarbon oils with heavy EP additives
  • Chlorinated
  • Sulfochlorinated
  • Sulphurised
Water Solubles
  • Hydrocarbon oils with heavy EP additives
  • Chlorinated
  • Sulfochlorinated
  • Sulphurized
EnviroDraw products can be found successfully completing these heavy-duty operations:
  • Can drawing
  • Extrusion
  • Wire drawing
  • Cold forming
  • Wire drawing
  • Spinning
  • Hydroforming
  • Heading
  • Stainless Steel Sink drawing
Because of the severity of the above operations, lubrication requirements are critical and high quality products are essential. Heavy duty pastes; chlorinated, sulfochlorinated, and sulphurised oils; emulsions; or waxes are all typically used depending on the severity of the deep drawing operation. These type products not only act as very effective lubricants, but increases the formability, helps prevent galling and pressure welding, and minimizes damage to the surface finish. Mineral oils, soap solutions, and general-purpose soluble oils are not usually used successfully in these type heavy duty operations. Ease of removal after forming is also a consideration since all traces of lubricant must be removed prior to subsequent heat treatment or before putting into service.
For more information about our products contact us at sales@enviroserveinc.com